Name: Teen Celebrations: National Ken Day
Start: 2024-03-13T09:00:00-05:00
End: 2024-03-13T17:00:00-05:00

Redeem Your 3D Print Coupon

Step 1 of 3

Use the form below to redeem your 3D Print Coupon awarded for logging your Summer Reading. You may choose any one item as listed in our 3D Print Binder* collection.

Be sure to enter the name of the recipient of the coupon when completing this form. This information may be used to verify the validity of the coupon.

Coupons awarded for Summer Reading 2024 EXPIRE on 4/30/2025. Please submit your request before then.

All models are printed on a first come, first serve basis. During peak request times, turnaround time for 3D prints may be up to several weeks. We can accommodate one (1) color per submission.

Please direct questions to (314) 821 5770 x 1027.

* A few items from the binder are not available, you will not see them listed as a choice below.

Name of Coupon Recipient(Required)

First Last

Library Card Number

How would you like to be contacted?(Required)

We no longer make phone calls for notifications about 3D prints. However, we ask that you provide your phone number (below) as a back up in case email notifications fails.

Email

Phone(Required)

Email(Required)

Please choose up to 3 colors for your request. Files submitted will be printed in a single color. We will start with your first choice and move down to the third depending on availability.

Some colors are limited and may not be selected multiple times. All colors are subject to availability and may not be available for all models.

1st Color Choice(Required)

2nd Color Choice(Required)

3rd Color Choice(Required)

Select a Category(Required)

Select a Model (Animals and Flexible)(Required)

Select a Model (Bluey)(Required)

Select a Model (Dinosaurs)(Required)

Select a Model (Harry Potter Wands)(Required)

Select a Model (Legend of Zelda)(Required)

Select a Model (Marvel)(Required)

Select a Model (Pokemon)(Required)

Select a Model (Saint Louis)(Required)

Select a Model (Star Wars)(Required)

Select a Model (Super Mario)(Required)

Redeem Your 3D Print Coupon

Step 1 of 3

Use the form below to redeem your 3D Print Coupon awarded for logging your Summer Reading. You may choose any one item as listed in our 3D Print Binder* collection.

Be sure to enter the name of the recipient of the coupon when completing this form. This information may be used to verify the validity of the coupon.

Coupons awarded for Summer Reading 2024 EXPIRE on 4/30/2025. Please submit your request before then.

All models are printed on a first come, first serve basis. During peak request times, turnaround time for 3D prints may be up to several weeks. We can accommodate one (1) color per submission.

Please direct questions to (314) 821 5770 x 1027.

* A few items from the binder are not available, you will not see them listed as a choice below.

Name of Coupon Recipient(Required)

First Last

Library Card Number

How would you like to be contacted?(Required)

We no longer make phone calls for notifications about 3D prints. However, we ask that you provide your phone number (below) as a back up in case email notifications fails.

Email

Phone(Required)

Email(Required)

Please choose up to 3 colors for your request. Files submitted will be printed in a single color. We will start with your first choice and move down to the third depending on availability.

Some colors are limited and may not be selected multiple times. All colors are subject to availability and may not be available for all models.

1st Color Choice(Required)

2nd Color Choice(Required)

3rd Color Choice(Required)

Select a Category(Required)

Select a Model (Animals and Flexible)(Required)

Select a Model (Bluey)(Required)

Select a Model (Dinosaurs)(Required)

Select a Model (Harry Potter Wands)(Required)

Select a Model (Legend of Zelda)(Required)

Select a Model (Marvel)(Required)

Select a Model (Pokemon)(Required)

Select a Model (Saint Louis)(Required)

Select a Model (Star Wars)(Required)

Select a Model (Super Mario)(Required)

Teen Summer Volunteer Groups

Group 1: Summer Reading Assistant: Help us give out Summer Reading prizes, create coupon booklets, help patrons sign up for Summer Reading at the public computers, and answer questions about the program.

Group 2: Youth Services Event Volunteer: This is perfect for someone that wants to help us put on events for kids and teens! Duties include program preparation, helping at specific events such as storytime, and assisting during library programs with staff.

Group 3: Behind the Scenes Volunteer: A fit if you enjoy independent projects like shelving books, helping us keep the room inviting and tidy, refilling book displays, helping with behind the scenes Summer Reading prep including couponing, supply preparation, and more!

Group 4: Office Assistant: Work in the library admin office on light clerical duties such as scanning and stickering books. Great if you want some office/organizing experience!

Group 5: Mural Project: Help us design a library mural on the outside fence. If you love creative projects, painting and teamwork, this group is for you!

Art Gallery Application

Thank you for your interest in exhibiting your artwork at Kirkwood Public Library. Please read the Art Exhibits Policy prior to applying.

Please complete the following application, prior to submitting your portfolio.

Artist's Name(Required)

First Last

Are you 18 years or older?(Required)

Yes

No

Address(Required)

Street Address Address Line 2 City State / Province / Region ZIP / Postal Code

Email(Required)

Phone(Required)

Brief description of the artwork and approximate number of items:(Required)

I have visited the Kirkwood Public Library and understand the available exhibit space and how the art will be hung.(Required)

Yes

No

Will the artwork be for sale?(Required)

Yes

No

Parent or Guardian's Name(Required)

First Last

Once you've completed this form, be sure to submit your portfolio for review.

Electronic Portfolios can be electronically submitted to jmcdonald@kirkwoodpubliclibrary.org.

Phsyical Portfolios may be delivered or mailed to:
Kirkwood Public Library
Attn: Art Gallery
140 E. Jefferson Ave.
Kirkwood, MO 63122

Sign Up for the Library's Email Newsletters

Select the interests below for which you wish to receive occasional emails. You can update your profile at anytime to change which emails you receive or you may unsubscribe if you wish to no longer receive any emails from Kirkwood Public Library's newsletters.

Email(Required)

Name(Required)

First Last

Select list(s) to subscribe to(Required)

Business Newsletter

Outlook Newsletter

Program Newsletter

Yes, I would like to receive emails from Kirkwood Public Library. (You can update your preferences or unsubscribe anytime)

Sign Up for Home Borrowing

We are delighted to offer our Home Borrowing Services and look forward to sharing our vast collection of books, movies and music with you. Please don’t hesitate to call with any questions. Please complete the form below or simply call 314-821-5770, option 2.

Name(Required)

First Last

Address(Required)

Street Address Address Line 2 City State ZIP Code

Phone

Email

How would you like to be contacted?(Required)

Phone

Email

Other

Request for a Library-Sponsored Event

The Kirkwood Public Library maintains a meeting room for Library sponsored programs consistent with its mission “to inspire a lifelong commitment to learning and creativity, for a more prosperous and connected community.” The Kirkwood Public Library welcomes outside organizations or individuals interested in presenting at the Library. Events must be offered virtually and may be done so at the discretion of library managers. This selection will be based on public service needs and other activities scheduled.

Request a Purchase

In order to make a request you must have a Kirkwood Public Library card in good standing (not expired and owing less than $10 in fines). This request will be reviewed using current collection development policy guidelines and reviews. The Library reserves the right to make the final decision on requests. Once submitted, the library will be in contact regarding this request.

Library Card Number(Required)

Phone(Required)

Name(Required)

First Last

Email

Please select up to 2 desired formats.(Required)

Book

Large Print

Audiobook

Music CD

Book Club Kit

DVD

Blu-ray

Title(Required)

Publication Date(Required)

Author or Artist(Required)

Please indicate if you desire a specific edition of this item.

Contact a Library Administrator

Choose a Library Administrator(Required)

Name(Required)

First Last

Phone(Required)

Email

Message(Required)

Contact a Board Trustee

Choose a Trustee(Required)

Name(Required)

First Last

Phone(Required)

Email

Message(Required)

KPL Podcast

Do you have a comment or question for the KPL Podcast?

Name

First Last

Email

Question or Comment

Submit a Large Format Print Request

Complete the form below to submit your Large Format Print request to the Kirkwood Public Library.

Printing is performed on a first-come, first-serve basis.
Up to 3 files may be submitted at a time.
Files should, if possible, be formatted to fit the desired print size. Small files can be scaled, but will distort and/or pixelate.
Once received, staff will notify you via email with a final cost.
Upon approval, staff will attempt to print as per the selected settings.
Upon completion, you will be notified via email.v
Prints will be available to pick up at the Customer Service Desk and are held for 15 days after completion.
Once picked up, another print request may be submitted.

If you would like to pay for your print with a credit card, a valid Kirkwood Public Library card (or a library card from one of the Municipal Library Consortium libraries) is required for 3D Printing. Fees for printing will be charged to your library account and can be paid via credit card by logging into your account online. If you wish to pay cash or do not have a card from one of the MLC libraries, do not enter a library card number.

Please direct questions to (314) 821 5770, option 5.

Name(Required)

First Last

Library Card Number

Email(Required)

We primarily notify you about this request through email.

Phone(Required)

We do not make phone calls about your request unless repeated attempts to contact you via email are unsuccessful.

Paper Type(Required)

What kind of paper would you like used for your request?

Paper Width (Inches)(Required)

Select 24 for anything 24 inches or less in width, or 36 for anything between 24 and 36 inches in width.

Paper Length (Inches)(Required)

Choose the length that most closely matches the size this print should be. Do not select a size smaller than what you intend to print.

Specfic Dimensions

Please specify the exact dimensions this print should be if different from the sizes selected above. Print sizes are limited to a maximum of 36 inches (3 feet) wide and 120 inches (10 feet) long. If not selected, printing will be made to fit either the width or length selected above.

Color(Required)

File Upload(Required)

Please upload files in .jpeg, .png, or .pdf format. Maximum file size is 96 MB. For files larger than 96 MB, please call (314) 821-5770, option 5.

Drop files here or

Accepted file types: jpg, png, pdf, jpeg, Max. file size: 96 MB, Max. files: 3.

Comments

Please provide any comments regarding this print.

Total

Below is the anticipated total price for each file submitted, assuming they are all the same size. This is just an estimate to give you an idea of the cost. The actual cost will be based on materials consumed and may vary from the average costs listed above. Upon completion, library staff will let you know the final cost.

Submit Your 3D Print Request

Step 1 of 3

STOP! If you have a free 3D print coupon from Summer Reading, do not complete this form. Please follow the instructions on your coupon to access the form on which you can redeem your coupon. Thanks!

Use the form below to submit your request for a 3D printed model from the Kirkwood Public Library. You may choose to either upload your own file(s) or choose one from our 3D Print Binder collection.

If uploading your own files - once submitted, a librarian will contact you with an estimate of time to print and cost for approval.

If selecting from the 3D Print Binder - your selection will contain pricing information. You will be contacted when your print is ready to pick up.

Only cash payments are available for 3D Prints.

All models are printed on a first come, first serve basis. During peak request times, turnaround time for 3D prints may be up to several weeks. We accept one submission per person at at time. Once that print is picked up and paid, you may submit another request. We can accommodate one (1) color per submission.

Please direct questions to (314) 821 5770 x 1027.

Name(Required)

First Last

Library Card Number

How would you like to be contacted?(Required)

We no longer make phone calls for notifications about 3D prints. However, we ask that you provide your phone number (below) as a back up in case email notifications fails.

Email

Phone(Required)

Email(Required)

What type of 3D Print request would you like?(Required)

Upload my own file(s)

Choose from our 3D Print Binder

Please choose up to 3 colors for your request. Files submitted will be printed in a single color. We will start with your first choice and move down to the third depending on availability.

Some colors are limited and may not be selected multiple times. All colors are subject to availability and may not be available for all models.

1st Color Choice(Required)

2nd Color Choice(Required)

3rd Color Choice(Required)

File Upload(Required)

Accepted file types: stl, Max. file size: 96 MB.

Please upload files in .stl file format only. Maximum file size is 96 MB. For files larger than 96 MB, please call (314) 821-5770, x 1027.

Model Size

Please note that we can resize objects prior to printing. We can scale proportionately and non-proportionately. If you need your model(s) scaled to fit a certain size requirement, please provide a dimension(s) / unit of measurement. If only one dimension is provided the model will be scaled proportionately. Example: 5 inches wide.

Select a Category(Required)

Select a Model (Animals and Flexible)(Required)

Select a Model (Bluey)(Required)

Select a Model (Dinosaurs)(Required)

Select a Model (Harry Potter Wands)(Required)

Select a Model (Legend of Zelda)(Required)

Select a Model (Marvel)(Required)

Select a Model (Pokemon)(Required)

Select a Model (Saint Louis)(Required)

Select a Model (Star Wars)(Required)

Select a Model (Super Mario)(Required)

Comments

Please provide any comments regarding this print.

Community Spotlight Collection Submission Form

Step 1 of 2

Service and Administration Policies Kirkwood Public Library
ARTICLE V. Collection Development Policy Of The Kirkwood Public Library
Section 6. Community Spotlight -- The Kirkwood Public Library values local authors and encourages the inclusion of their work to the collection. Authors who are residents of Kirkwood or non-resident authors whose work features Kirkwood, MO may submit their book to the collection. Advanced Reading copies and copies with non-traditional library- binding will not be added to the collection. Generally the work must be published in the last two years. Contributed items become property of the library and are subject to all of the Library’s Withdrawal Criteria and Gift policies.

See the full Collection Development Policy here.

Requirements(Required)

Please affirm eligibility by checking all boxes below and reading the Community Spotlight Collection Policy above. Items that do not meet all criteria will not be considered for inclusion

Creator resides in Kirkwood, MO OR the work has significance to Kirkwood, MO.

If print, book is professionally bound and printed and is not an Advanced Reading Copy.

Creator or donator has read the Community Spotlight Collection policy (above).

Item was published within the past 2 calendar years.

Creator or donator understands that their item becomes property of the Kirkwood Public Library, and that KPL will not be returning my item at a future date.

Please affirm eligibility by checking all boxes above and reading the Community Spotlight Collection Policy. Items that do not meet all criteria will not be considered for inclusion

Donate or Purchase(Required)

I would like to DONATE an item

I would like Kirkwood Public Library to PURCHASE an item

Donated by(Required)

First Last

Requested by(Required)

If requester is not the creator of the item, please make a Request for Purchase by contacting the Reference Desk at 314-821-5770 option 3 or filling out the form on our Can't Find It page.

First Last

Creator Name(Required)

First Last

Address(Required)

Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country

Email(Required)

Phone(Required)

Title of Work(Required)

Publication Date(Required)

ISBN(Required)

Publisher(Required)

Price(Required)

Where to Purchase(Required)

Thank you for your request for addition to the Community Spotlight Collection. Please complete and submit this form then mail your item to the address below:
Kirkwood Public Library
Community Spotlight Submission
140 E. Jefferson Avenue
Kirkwood, MO 63122

Events for July 16, 2024 › Teen Programs

Teen Programs

Teen Drop in Crafts: Sock Snowmen

Redeem Your 3D Print Coupon

Redeem Your 3D Print Coupon

Art Gallery Application

Sign Up for the Library's Email Newsletters

Sign Up for Home Borrowing

Request for a Library-Sponsored Event

Request a Purchase

Get Children's Book Recommendations

Get Book Recommendations

Contact a Library Administrator

Contact a Department

Contact a Board Trustee

KPL Podcast

Submit a Large Format Print Request

Submit Your 3D Print Request

STOP! If you have a free 3D print coupon from Summer Reading, do not complete this form. Please follow the instructions on your coupon to access the form on which you can redeem your coupon. Thanks!

Community Spotlight Collection Submission Form

Events for July 16, 2024 › Teen Programs

Filters